$8 ABS unit delete

From the tranny down to wheel bearings.
User avatar
Yoshi
Site Admin
Posts: 9053
Joined: Thu Feb 26, 2009 7:47 pm
AntiSpam: No
Location: North VA
Contact:

$8 ABS unit delete

Postby Yoshi » Mon Jan 16, 2017 10:30 pm

So here's my thought. The regular ABS models of the E30 works pretty simply. The rear line from the master goes to the ABS unit, then to the rear prop valve and then splits in the rear. The front goes from the master, to the ABS unit, then it splits from there to both from brakes.

Couldn't you just disconnect the rear input line from the ABS unit and put it into the rear prop valve (Part #5 in the picture linked), then Just use a T fitting to connect the front input to the front two brakes?

http://www.realoem.com/bmw/enUS/showpar ... Id=34_0153

Basically, just buy #3 in the diagram above and bend lines. Why doesn't anyone do this?
Image
Status: HG repair. 488wtq though!
User avatar
M20_fever
Größter Vorsitzender
Posts: 11000
Joined: Fri Feb 27, 2009 1:28 pm
AntiSpam: No
Location: Northern IL

Re: $8 ABS unit delete

Postby M20_fever » Tue Jan 17, 2017 4:44 pm

You need something in the system to maintain the minimum line pressures front and rear. I'm not sure how the ABS unit works, but often the check valve is integrated into it.
Image
Midwestern Councel C Prepared class champion 2012
North Suburban Sports Car Club C Prepared class champion 2012
HSAX Instructor

GET YOUR E3P GEAR HERE: http://www.cafepress.com/e3pgearshop

Return to “Drive Line”

Who is online

Users browsing this forum: No registered users and 2 guests